2. Scan to e-Filing
28 Scanning Guide — How to Perform Scan to e-Filing
15. If the “To continue, place document on glass. And press
Scan!” message is displayed, place another original on glass
and press [SCAN!] to scan another original, or press the
[JOB FINISH] button to finish scanning.
• When the original is set on the Automatic Document Feeder, this screen is
not displayed. However, this screen is displayed when you press the [CON-
TINUE] button during scanning the originals.
• If you want to cancel the storage of the scanned data, press the [JOB CAN-
CEL] button.
• You can change the setting of the original type and scanning conditions,
using the [EDIT] button before pressing the [SCAN!] button.
NOTE: When 20 Store to e-Filing jobs are reserved, the reservation fulll message will be dis-
played in the touch panel. In that case, wait until the next Store to e-Filing job is com-
pleted or delete the jobs from the [JOB STATUS] button.
To Next Page
Loading...
