4. Scan to E-mail
54 Scanning Guide — How to Perform Scan to E-mail
2. Press the buttons to enter the search strings that you want
to specify, and then enter the [SEARCH] button.
• When pressing each button, the letter entry screen is displayed. Enter the
value using the keyboard and digital keys, and press the [ENTER] button to
set the entry.
SUPPLEMENT: It will search for the contacts that contain the search text in the specified items.
NOTE: If the [DIR SERVICE] button is displayed as a selected button, this equipment will
search for contacts in the LDAP server. In that case, press the [DIR SERVICE] button
to display the Directory Service Name screen and clear the selection of a directory ser-
vice. Then press the [ENTER] button to return the ADDRESS SEARCH screen.
3. Press the contact that you want to send, and press the
[ENTER] button.
• The screen returns to the ADDRESS BOOK screen.
To Next Page
Loading...
