Installing Client Software for IPP Printing 123
5
Select “Device type”, and enter “http://[IP address]:631/Print” in the
“Hostname or IP address” field.
y Enter the IP address of this equipment instead of [IP address].
Example: IP address = 10.10.70.120
http://10.10.70.120:631/Print
y If your network uses a DNS or WINS server, enter the printer name of this equipment
provided from DNS or WINS instead of [IP address].
Example: Print Server Name = Mfp-00c67861
http://Mfp-00c67861:631/Print
y When you connect from the Internet, enter the FQDN of this equipment provided from
DNS instead of [IP address].
Example: URL = mfp_00c67861.toshiba.com
http://mfp_00c67861.toshiba.com:631/Print
“P” for “Print” in the IPP URL must be capitalized. When you are using on Windows
Vista, the IPP port can be created by entering “print” (non-capitalized) in the IPP URL,
but the print job cannot be sent to the equipment. In that case, delete the IPP port and
then create the IPP port correctly again.
y If an administrator has enabled the IPP Port80 Enabled option on this equipment, you
can exclude the port number from the URL. (i.e. “http://192.168.255.48/Print”)
y If an administrator has enabled the Enable SSL option for IPP Print, you must enter
“https://[IP address]:[SSL port number]/Print” in the “URL” field.
(i.e. “https://192.168.255.48:443/Print”)
6
Click [Next].
When the Authentication setting for IPP Print is enabled, the dialog box to enter a user
name and password appears. If this dialog box appears, enter the user name and pass-
word and click [OK]. For user name and password, please ask your administrator.
To Next Page
Loading...
