5 Printing from Windows
268 Setting Up Print Options
The [Run Font Manager] button is not displayed for the PCL6 printer driver.
Configuration Tab
The Configuration Tab allows you to configure options. When any optional unit is installed in this
equipment, set the configuration of the machine on this tab.
When using Windows Vista
In order to open the Fonts tab, right-click the printer icon and select [Run as administrator].
Then enter the administrator's password of the client computer to operate with an administrator's
privilege.
1) Model Selection
This sets the model name of the equipment.
2) External LCF
Check this when the External LCF is installed.
3) Inserter Unit
Check this when the Inserter Unit is installed.
4) Drawers
This sets whether or not the optional drawers or LCF is installed.
- Drawer1,2 & Drawer3,4 — Select this when the Drawer1, Drawer2, and drawer3,
Drawer4 are installed.
- Drawer1,2 & LCF — Select this when the Drawer1, Drawer2, and LCF is installed.
LCF is not available for some countries or regions.
5) Finisher
This sets whether or not the optional finisher is installed.
- None — Select this when finisher is not installed.
- Finisher — Select this when the Finisher is installed.
1
2
3
4
5
7
8
6
9
To Next Page
Loading...
