Toshiba e-STUDIO 520 - About Installation Procedure; Parallel Port Connection; Usb Connection

2 Installing Client Software for Windows
22 About the Installation
About Installation Procedure
Please find the installation procedure suited to your environment from the following:
 P.22 “Parallel Port Connection”
 P.22 “USB Connection”
 P.23 “Local Area Network over TCP/IP”
 P.24 “Internet Connection”
 P.25 “Novell Printing”
— Parallel Port Connection
Available for: Windows 98, Windows Me, Windows NT 4.0, Windows 2000, Windows
XP, Windows Server 2003, Windows Vista.
When this equipment is connected to your computer with a printer cable, you can install the
printer drivers from the Client Utilities CD-ROM and set up the printer connection with LPT1 port.
 P.27 “Installing Client Software for Parallel Printing”
y Parallel printing is available only when the Parallel Interface is installed.
y This equipment cannot connect to the same computer with both Parallel and USB at a same
time.
— USB Connection
Available for: Windows Me, Windows 2000, Windows XP, Windows Server 2003, Win-
dows Vista
This equipment supports the Full Speed connection. When this equipment is connected to your
computer with the USB cable, you must install the printer drivers using the Windows Plug and
Play functions.
 P.55 “Installing Client Software for USB Printing”
Windows98
WindowsMe
WindowsNT4.0
Windows2000
WindowsXP
WindowsServer2003
WindowsVista
ConnectingwithParallelcable
SettinguptheLPT1Printer
Connection
WindowsMe
Windows2000
WindowsXP
WindowsServer2003
WindowsVista
ConnectingwithUSB
SettinguptheUSBPrinter
Connection