Installing Client Software for Raw TCP/LPR Printing 75
Installation for Raw TCP/LPR Printing by Add Printer Wizard
The procedure to install the printer driver for Raw TCP/LPR printing by Add Printer Wizard dif-
fers depending on the version of the Windows being used.
P.75 “Windows 2000/XP/Server 2003/Vista”
P.83 “Windows NT 4.0”
y TopAccessDocMon is also available for Raw TCP/LPR printing. To install TopAccessDoc-
Mon, you must install it from the Client Utilities CD-ROM separately.
y The Font Manager is also available to install and manage the TrueType fonts on your com-
puter. To install the Font Manager, you must install it from the Font CD-ROM that comes with
the Printer Kit or Printer/Scanner Kit.
P.408 “Installing Font Manager”
Windows 2000/XP/Server 2003/Vista
Installing the printer driver for Raw TCP/LPR printing by Add Printer Wizard
The following describes an installation on Windows XP. The procedure is the same when Win-
dows 2000, Windows Server 2003, or Windows Vista is used.
You must log into Windows as a user who has the “Administrators” or “Power Users” privilege.
You must log into Windows as a user who has the “Administrators” privilege when using Win-
dows XP/Server 2003/Vista.
1
After installing the client software, click [Start] and click [Printers
and Faxes] to open the Printers and Faxes folder.
y If you are using the Windows 2000, click [Start], select [Settings], and click [Printers]
to open the Printers folder.
y If you are using the Windows Vista, click [Start], select [Control Panel], and click
[Printers] under [Hardware and Sound] to open the Printers folder.
To Next Page
Loading...
