Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.4.x 177
y Drawers
Not Installed — Select this when no optional drawer is installed.
Drawer — Select this when the Drawer 3 and 4 are installed.
LCF — Select this when the LCF is installed.
y LCF is not available for some countries or regions.
y The finisher options such as stapling and hole punching can be selected even if you
select “Not Installed” for the Finisher option. If you select the finisher options for print-
ing but the finisher is not installed, finisher settings will be ignored and perform print-
ing correctly.
y External LCF
Not Installed — Select this when the External LCF is not installed.
Installed — Select this when the External LCF is not installed.
6
Click [Continue].
y The printer is added to the Printer List.
Configuring the Printer on Mac OS X 10.2.4 to Mac OS X 10.3.x
After you copy the PPD file to the library folder in the System Folder, you can configure the
printer.
This equipment supports the following Macintosh Printing Services: LPR Printing, AppleTalk
Printing, IPP Printing, and Bonjour Printing.
y LPR Printing
When this equipment and your computer are connected over TCP/IP network, you can
enable LPR printing from Macintosh computer.
y AppleTalk Printing
When this equipment and your computer are connected over AppleTalk network, you can
enable AppleTalk printing from Macintosh computer.
y IPP Printing
When this equipment and your computer are connected over TCP/IP network, you can
enable IPP printing from Macintosh computer.
y Bonjour Printing
When this equipment and your computer are connected over TCP/IP network, you can
enable Bonjour printing from Macintosh computer.
Configuring Macintosh LPR printing
The following describes an operation on Mac OS 10.3.x. The procedure is the same when Mac
OS X 10.2.4 to 10.2.8 is used.
To Next Page
Loading...
