Toshiba e-STUDIO 520 - Smb Printing; Internet Connection

2 Installing Client Software for Windows
24 About the Installation
y To print with a Raw TCP connection, this equipment must be configured to enable Raw TCP
Print Service. Ask your administrator if the Raw TCP Print Service is enabled.
y To print with a LPR connection, this equipment must be configured to enable LPD Print Ser-
vice. Ask your administrator if the LPD Print Service is enabled.
SMB Printing
Available for: Windows 98, Windows Me, Windows NT 4.0, Windows 2000, Windows
XP, Windows Server 2003, Windows Vista
This equipment can be used with an SMB printer connection that allows you to connect to this
equipment using File and Printer Sharing for Microsoft Networks service. SMB printing is the
common method used to set up the printer. However, SMB printing is not suitable for printing a
large amount of documents.
 P.88 “Installing Client Software for SMB Printing”
It assumes using SMB printing in a small network. If you can use the Windows NT 4.0, Windows
2000, Windows XP, Windows Server 2003, or Windows Vista as a print server, it is recom-
mended to set up for printing via Windows print server. For further information about setting up
printing via a Windows print server, see the Network Administration Guide.
— Internet Connection
Available for: Windows 2000, Windows XP, Windows Server 2003, Windows Vista
Windows98
WindowsMe
WindowsNT4.0
Windows2000
WindowsXP
WindowsServer2003
WindowsVista
NetworkEnvironmentoverTCP/IP
SettingupSMBPrinter
Connection
Windows2000
WindowsXP
WindowsServer2003
WindowsVista
ConnectingoverInternet
SettinguptheIPP
printerconnection