Installing the Printer on Mac OS 8.6/9.x 193
4
Select each option according to the configuration of this equipment
and click [OK].
y Finisher
Not Installed — Select this if a finisher is not installed.
Multi-Position Stapler — Select this when the Finisher or Saddle Stitch Finisher is
installed.
Multi-Position Stapler and Hole Punch — Select this when the Finisher or Saddle
Stitch Finisher and Hole Punch unit are installed.
When you select “Multi-Position Stapler” or “Multi-Position Stapler and Hole Punch”, the
saddle-stitching function will be selectable for printing. However, saddle-stitching is
available only when the Saddle Stitch Finisher is installed.
y Drawers
Not Installed — Select this when no optional drawer is installed.
Drawer — Select this when the Drawer 3 and 4 are installed.
LCF — Select this when the LCF is installed.
LCF is not available for some countries or regions.
y External LCF
Not Installed — Select this when the External LCF is not installed.
Installed — Select this when the External LCF is not installed.
5
Close the Chooser Dialog box.
y The Printer icon is created on the desktop.
To Next Page
Loading...
