5 Printing from Windows
230 Before Using the Printer Driver
1
Select the printer driver in the Printers and Faxes folder. Then click
[File] and select [Properties].
y When you are operating under Windows 98/Me/NT 4.0/2000/Vista, open the Printers
folder to access the printer driver.
y When using Windows Vista, click [Start], select [Control Panel], and click [Printers] to
open the Printers folder.
y The printer driver properties dialog box appears.
2
Display the [Configuration] tab, check on “Enable SNMP Communi-
cation”, and click [Update Now].
y The printer driver starts communicating with system and obtains option settings auto-
matically.
If the connection to the equipment has not been configured correctly, the message “The
address of your printer could not be located. Would you like to find it?” will be displayed.
If it is displayed, click [Yes] and search for the equipment using the TopAccessDocMon
Local Discovery dialog box. After searching the equipment, SNMP communication will
be enabled. For the instructions on how to search the equipment, refer to the instructions
of TopAccessDocMon.
P.370 “Finding the Printer Address”
To Next Page
Loading...
