Printing with Extended Print Functionality 293
Creating or editing a watermark
1
Click [Add] to create new watermark, or select a watermark that you
want to edit and click [Edit] to edit a watermark.
y The Watermark dialog box appears.
2
Enter the watermark text in the “Caption” field.
y You can enter up to 63 characters for the “Caption” field. However, if too many char-
acters are entered, the watermark may not be printed correctly.
3
Select a font for the watermark at the “Font Name” drop down
menu.
4
Select a font style for the watermark at the “Style” drop down
menu.
5
Enter the font size in the “Font Size” field.
y You can enter any integer between 6 to 300pt in units of 1pt.
6
To rotate the watermark, enter the degrees in the “Angle” field.
y You can enter from -90 degrees to 90 degrees in units of 1 degree in the “Angle” field.
y You can also set the angle using the scroll bar.
7
Select how the watermark text is printed from “Solid”, “Draw as
Outline”, and “Transparency”.
Solid — Select this to print solid type of watermark.
Draw as Outline — Select this to print an outline type of watermark.
Transparency — Select this for a transparent watermark. Set the transparent ratio from
0 to 100% in units of 1%. You can also set the transparent ratio using the scroll bar.
8
Click [OK] to save the watermark settings.
y The watermark is added or edited.
To Next Page
Loading...
