2 Installing Client Software for Windows
38 Installing Client Software for Parallel Printing
10
Click [Finish].
11
The installation is completed.
Before using the printer driver for printing, please configure the installed options of the
equipment and department code (if required) on the printer driver.
P.226 “Before Using the Printer Driver”
Windows 98/Me
Installing the printer driver for parallel printing by Plug and Play
The following describes an installation on Windows 98. The procedure is the same when Win-
dows Me is used.
1
Connect the printer cable to this equipment and your computer,
and then power on the equipment and your computer.
y The Add New Hardware Wizard dialog box appears.
2
Click [Next].
To Next Page
Loading...
