4 Retrieving Documents
178 Viewing Documents with e-BRIDGE Viewer
y The document can be opened directly from the e-BRIDGE Viewer by double-clicking the
document image.
y A memo can be attached to the document image and it can be used to filter the document
images.
y The document can be printed directly from the e-BRIDGE Viewer using the TOSHIBA e-
STUDIO MULTIFUNCTIONAL DIGITAL SYSTEMS that the e-BRIDGE Viewer supports.
y The document can launch a MAPI enabled Email client with the document attached.
y The document can be hidden in the e-BRIDGE Viewer so that only specific documents can
be managed.
System Requirements
The e-BRIDGE Viewer is available for following environments:
y Display Resolution
1024 x 768 dots or more is recommended
y Display Color
High Color (16bit) or higher is recommended
y CPU
Pentium 300 MHz minimum (Pentium 1GHz or faster recommended)
y Protocol
TCP/IP (Required to download the e-Filing documents from the equipments.)
y OS
Windows 2000 Service Pack 4
Windows XP Service Pack 1/Service Pack 2
Running e-BRIDGE Viewer
The e-BRIDGE Viewer can be run by clicking the Start menu and select [All Programs] -
[TOSHIBA e-STUDIO Client] - [e-BRIDGE Viewer].
When you run the e-BRIDGE Viewer, the Main Window of the e-BRIDGE Viewer appears. For
instructions on how to use the Main Window, please see the following section.
P.204 “How to Use Main Window”
To Next Page
Loading...
