Viewing Documents with e-BRIDGE Viewer 189
— Configuring Printer Settings
In the Printer window, you can specify the default printer that is used for printing a document
from the e-BRIDGE Viewer.
The e-BRIDGE Viewer can print to only the e-STUDIO printers that are supported by the e-
BRIDGE Viewer. Therefore, this function allows you to set the default printer only for this soft-
ware instead of the default printer that is set on Windows Operating System.
The Printer settings can be performed in the Printer window of the Settings dialog box that can
be displayed by selecting [Settings...] in the Edit menu.
1) Select e-STUDIO
Select the default printer to be commonly used for printing a document from the e-BRIDGE
Viewer. The selected printer will be selected as the default printer in the Print dialog box of
the e-BRIDGE Viewer, so that you do not have to change the printer every time you print a
document from the e-BRIDGE Viewer.
Only the printers that are supported by the e-BRIDGE Viewer is displayed in this drop down
box.
1
To Next Page
Loading...
