File Menu Functions 245
If you enable the Interleave option after enabling the Staple option, the Staple option will be
automatically disabled.
Source
Select the location from where the interleaving sheet is to be fed. When “Auto” is selected,
the paper is automatically selected according to the printed document size.
y When selecting the Bypass Tray in the Source drop down box, the message “Press JOB
STATUS button” will be displayed in the touch panel. When pressing the [JOB STATUS]
button, the message “Place Paper in the Bypass tray Press the START button” will be
displayed. Then place the paper in the Bypass tray and press the [START] button.
y The selectable values in the Source drop down box vary depending on the optional
devices installed on this equipment.
Duplicate
When you check on this, you can print previous page images on the inserted sheet.
19) Paper Type (Insert)
When you select “Bypass Tray” for the paper source of either the “Use Front Cover”, “User
Back Cover”, “Insert Pages”, or “Interleave Pages” option, select the paper type for the paper
fed from the Bypass Tray.
20) [Print]
Click this to print the document.
21) [Cancel]
Click this to cancel printing.
22) [Reset]
Click this to restore the default settings.
After clicking [Print] in the Print window, the window displays the successful message.
Properties
You can display the properties of a box, folder, and document using this function.
The Properties function is enabled when you select a box, folder, or document in the Documents
frame.
P.246 “Box Properties”
P.248 “Folder Properties”
P.249 “Document Properties”
To Next Page
Loading...
