6 Menu Functions (Web utility)
238 File Menu Functions
Test Print
You can print one copy of selected document with default print settings using this function.
The Test Print function is enabled when you select document in the Documents frame. If you do
not select a document, the message “Please select a document.” will be displayed.
When you select Test Print from the File menu, the Test Print window appears.
When the User Management Setting is enabled, the maximum number of copies that is allowed
for the department and user will be displayed in the upper right of the page.
1) All Pages
Select this to print all pages of the document.
2) [first page number]-[last page number] Pages
Select this to specify the pages to be printed. Enter the first-of-page and end-of-page num-
ber to be printed in each field.
3) Department Code
Enter the 5-digit department code. This must be enter only when the department code is
enabled on the equipment.
4) [Print]
Click this to print one copy of the document.
5) [Cancel]
Click this to cancel printing.
After clicking [Print] in the Test Print window, the window displays the successful message.
1
3
2
4
5
To Next Page
Loading...
