8.WHEN SOMETHING IS WRONG WITH THE EQUIPMENT
When You Think Something Is Wrong With the Equipment 127
8 WHEN SOMETHING IS WRONG WITH THE EQUIPMENT
The message indicating
no paper does not
disappear even after
paper is placed in the
drawer.
Sheets placed in the drawer
are not aligned.
Remove the sheets from the drawer, align
them, and replace them.
The side and end guides do
not match the paper size in
the drawer.
Adjust the side and end guides to match the
paper size.
The amount of paper placed
in the Large Capacity Feeder
is too small.
Place more than 10 sheets of paper in the
Large Capacity Feeder.
The paper is misfed at the end
of the drawer.
Pull out the drawer and remove any misfed
paper.
There is something other than
paper in the drawer.
Do not put anything but paper in the drawer.
Problem Description Cause Corrective Action
To Next Page
Loading...
Need help?
General
