1.TROUBLESHOOTING FOR THE HARDWARE
Cleaning the Hole Punch Dust Bin 63
1 TROUBLESHOOTING FOR THE HARDWARE
5
Dispose of the paper punchings.
9
Close the front cover of the finisher.
Saddle Stitch Finisher Hole Punch Unit
6
Push back in the hole punch dust bin.
7
Return the Hole Punch Unit to its original position.
8
Carefully return the finisher to its original position.
Do not put your hand or fingers on the top of the
finisher when closing it.
They could be caught and this could injure you.
1
Open the front cover of the finisher.
To Next Page
Loading...
Need help?
General
