1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 31
1 TROUBLESHOOTING FOR THE HARDWARE
Paper misfeed in the Saddle Stitch Finisher and the Hole Punch Unit
13
Carefully return the finisher to its original position.
Do not put your hand or fingers on the top of the
finisher when closing it.
They could be caught and this could injure you.
14
Close the front cover of the finisher.
1
Remove the misfed paper from the receiving tray
section.
2
Open the front cover of the finisher.
3
Turn the green dial until the triangle mark falls within
the designated area of the label.
To Next Page
Loading...
