1 TROUBLESHOOTING FOR THE HARDWARE
38 Clearing a Paper Misfeed
4
Clear the paper misfeed following the guidance shown on the touch panel. Then close
all the drawers and covers.
Printing resumes.
3
Check that the guide width is correct and there is no
folded/curled paper or overloading, and then close
the drawer.
Be sure that the height of the stacked paper does not
exceed the line indicated inside of the side guides. In
particular, be sure that the upper limit for thick paper is not
exceeded when placing thick paper in the first drawer. The
amount of thick paper you can load in the drawer is lower
than that for plain paper.
To Next Page
Loading...
Need help?
General
