EasyManuals Logo

Toshiba e-STUDIO2050C Troubleshooting Guide

Toshiba e-STUDIO2050C
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
1 TROUBLESHOOTING FOR THE HARDWARE
40 Clearing a Staple Jam
5
Lower the guide while holding the knob.
Do not touch the stapling area.
The actual needle point could cause you personal injury.
6
Remove the top staple sheet.
7
Holding the knob, raise the guide, and return it to its
original position.
8
Remove the staples fallen between the staple
cartridge and the staple case or the ones in the staple
receiver.
9
Fit the staple cartridge into the stapler.
Insert the cartridge until it is caught by the latch and fixed with a
click.

Table of Contents

Other manuals for Toshiba e-STUDIO2050C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba e-STUDIO2050C and is the answer not in the manual?

Toshiba e-STUDIO2050C Specifications

General IconGeneral
BrandToshiba
Modele-STUDIO2050C
CategoryAll in One Printer
LanguageEnglish

Related product manuals