1 TROUBLESHOOTING FOR THE HARDWARE
Refilling With Staples 55
5
Take the empty staple case out of the staple cartridge.
Pull up the empty staple case while pushing both sides as
shown in the figure.
6
Fit a new staple case on the staple cartridge.
Push the staple case hook into the staple cartridge socket until
you hear a click.
7
Fit the staple cartridge into the stapler.
Insert the cartridge until it is caught by the latch and fixed with a
click.
8
Return the Hole Punch Unit to its original position.
9
Carefully return the finisher to its original position.
Do not put your hand or fingers on the top of the
finisher when closing it.
They could be caught and this could injure you.
To Next Page
Loading...
Need help?
General
