1 PREPARATION
12 Components
Right side
1. Platen Cover (optional)
Close this before start copying or scanning.
Depending on the region, the Platen Cover is installed as a standard part.
2. Side cover
3. Bypass tray
Place special paper such as thick paper, overhead transparencies, or tracing paper.
P.25 “Loading paper on the bypass tray”
P.28 “Loading an envelope on the bypass tray”
4. Automatic Duplexing Unit (optional)
Install this to make it possible to print on both sides of paper.
5. USB port
Connect a USB device to store scanned data or print files stored in the USB device.
To Next Page
Loading...
