Toshiba e-STUDIO2803AM - Continuous Copying Speed

8.Appendix
e-STUDIO2303AM/2803AM Specifications 183
8 Appendix
 These specifications vary depending on the copying conditions and the environment.
 Specifications and appearance are subject to change without notice in the interest of product
improvement.
 Continuous copying speed
sheets/min.
*1 ST-R can be loaded only on the bypass tray.
 The values above are measured when originals are set on the original glass, 100% and nonsort multiple
copies are made.
 TOSHIBA-recommended paper is used for the values of the specifications above.
 The bypass copying speed is as listed above when specifying the paper size.
 This specification varies depending on the copying conditions and the environment.
Power requirements and power
consumption
(including optional equipments)
AC 220-240 V±10%, 8 A (50-60 Hz): 1.5 kW or less
AC 120 V±10%, 12 A (60 Hz): 1.5 kW or less
Dimensions (equipment only) 575 mm (22.6") (W) x 565 mm (22.2") (D) x 402 mm (15.8") (H)
Weight (including equipment and drum) Approx. 24.3 kg (53.6 lb.)
Space occupied (equipment only) 943 mm (37.1") (W) x 565 mm (22.2") (D)
Paper size Paper source e-STUDIO2303AM e-STUDIO2803AM
A4, A5-R, B5, LT, ST-R*
1
Drawer 23 28
Bypass tray 23 28
A4-R, B5-R, LT-R Drawer 19 19
Bypass tray 19 19
B4, FOLIO, LG, COMP, 13"LG Drawer 16 16
Bypass tray 16 16
A3, LD Drawer 14 14
Bypass tray 14 14