2 COPY FUNCTIONS
68 Using Templates (Copy)
Using Templates (Copy)
Once you have set the several functions and settings, you can register up to three of them as “templates” and
recall one of them for frequent use.
Registering the templates
1
Make settings for the functions to register as a template.
2
Press [TEMPLATE].
3
Press or to select “REGISTRATION”, and then press .
4
Press or to select a template, and then press [OK].
You can register three templates for copying.
The settings are overwritten if you select an existing template.
You can also register and edit templates with TopAccess. For details, refer to the TopAccess Guide.
You can specify the following items in copy templates.
No. Item Name Settings
1 Copy Quantity 1-999
2 Exposure AUTO, MANUAL(±4)
3 Original Mode TEXT/PHOTO, TEXT, PHOTO, BACKGROUND ERASE
4 Paper Source Drawer 1~2, Bypass, APS
5 Zoom 25~400%, AMS
6 Finishing NON SORT, SORT, ROTATE SORT
7 Nin1 OFF, 2IN1, 4IN1
8 Nin1-Original size
9 Nin1-Original orientation PORT., LAND.
10 ID Card OFF, ON
11 Edge Erase OFF, ON
12 Edge Erase Adjustment 4~15
13 Dual Page OFF, ON
14 Dual Page Adjustment 8~30
15 Image Shift OFF, LEFT, RIGHT
16 Image Shift Adjustment 4~15
TEMPLATE
RECALL
REGISTRATION
To Next Page
Loading...
