To Next PageTo Next PageWhat to do if my Toshiba e-STUDIO2803AM All in One Printer says 'TONER EMPTY'?
When 'TONER EMPTY' appears on the LCD screen of your Toshiba All in One Printer, it means the toner in the toner cartridge has run out. You should replace the toner cartridge with a new one.
Why does my Toshiba e-STUDIO2803AM say 'BYPASS EMPTY'?
The message 'BYPASS EMPTY' on your Toshiba All in One Printer indicates that the paper set on the bypass tray has run out. To resolve this, load paper on the bypass tray.
What to do if my Toshiba e-STUDIO2803AM says 'DRAWER * EMPTY'?
The message 'DRAWER * EMPTY' on your Toshiba All in One Printer means that the paper in the drawer indicated by '*' has run out. To fix this, load paper in the drawer.
Why does my Toshiba e-STUDIO2803AM show 'ERROR : TONER'?
If you see 'ERROR : TONER' on your Toshiba All in One Printer, it could be due to two reasons: either the toner cartridge is not installed correctly, so you should install the toner cartridge correctly; or you are using a toner cartridge other than the one we recommend. If you are using a toner cartridge other than the one we recommend, the equipment may not be able to detect whether it is installed or not.
What does 'TONER IS LOW' mean on my Toshiba e-STUDIO2803AM All in One Printer?
If your Toshiba All in One Printer displays 'TONER IS LOW', it means there is only a little toner remaining in the toner cartridge. Do not replace the toner cartridge until 'TONER EMPTY' appears on the LCD screen.
How to fix 'CHECK:PAPER SIZE' error on Toshiba All in One Printer?
The 'CHECK:PAPER SIZE' message on your Toshiba All in One Printer indicates that the incorrect paper size has been set for paper loaded on the bypass tray. Remove the paper from the bypass tray and load it again so that the display shows 'BYPASS PAPER SIZE'. Set the correct paper size. When you load paper the size other than the standard ones, select 'CUSTOM' for the paper size.
What does 'COUNT OVER' mean on my Toshiba e-STUDIO2803AM All in One Printer?
The 'COUNT OVER' message on your Toshiba All in One Printer means that the number of pages scanned has exceeded the maximum value. You can either select 'PRINT' on the LCD screen to copy the data scanned so far, or select 'CANCEL JOB' to delete all the data scanned so far.
What to do if Toshiba All in One Printer says 'MEMORY IS FULL PRESS ANY KEY'?
If your Toshiba All in One Printer displays 'MEMORY IS FULL PRESS ANY KEY', press any button on the control panel to delete the scanned data.
How to fix paper misfeeds on Toshiba e-STUDIO2803AM RADF?
If paper misfeeds on the Reversing Automatic Document Feeder (RADF) of your Toshiba All in One Printer, remove any misfed paper.
What to do if my Toshiba e-STUDIO2803AM All in One Printer says 'CLOSE ***'?
If your Toshiba All in One Printer displays 'CLOSE ***', close the cover securely.
General| Functions | Print, Copy, Scan |
|---|---|
| Print Speed (Black) | 28 ppm |
| Print Resolution | 2400 x 600 dpi |
| Copy Speed (Black) | 28 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Dimensions (W x D x H) | 575 x 540 x 402 mm |
| First Print Out Time | Approx. 6.4 seconds |
| Memory | 512 MB |
| Scanner Type | Flatbed, ADF |
| Paper Capacity | 250 sheets |
| Paper Size | A4, A5 |
| Paper Weight | 64-80 gsm |
| Connectivity | USB, Ethernet |
