Toshiba e-STUDIO2803AM - 14 Self-Diagnosis Code (03;04;05;08 Code); Input Check (Test Mode 03)

5
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
SELF-DIAGNOSIS MODES
5 - 5
5.2 Input Check (Test Mode 03)
The status of each input signal can be checked by pressing the digital keys in the test mode (03).
Operation procedure
Fig.5-2 Example of display during input check
[0][3]
[POWER]
[START] [Digital keys]
[CANCEL]
(LCD ON)
[POWER] OFF/ON
(Exit)
[CLEAR/STOP][CLEAR/STOP]
TEST MODE C
MC= 1