Toshiba e-STUDIO2803AM - Exit Roller

e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A © 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 92
4.8.12 Exit roller
(5) Release 3 latches and take off the exit
sensor [5].
(6) Disconnect the connector.
Fig. 4-244
(1) Take off the tray rear cover.
 P. 4-4 "4.1.8 Tray rear cover"
(2) Remove 1 clip [1] and take off 1 bushing [2].
Fig. 4-245
(3) Unhook the grounding spring [3].
Fig. 4-246
[5]
[1]
[2]
[3]