9
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
REPLACEMENT OF PC BOARDS
9 - 5
9.2.2 LVPS
Notes:
Be very careful of residual charge in the
capacitors of the LVPS; this may remain
even after the main switch is turned OFF.
(1) Take off the rear cover.
P. 4-6 "4.1.10 Rear cover <23LA/23LM/
28LM/23HA/28HA>"
(2) Disconnect all connectors on the LVPS (6
pcs.).
Fig. 9-11
(3) Remove 4 screws and take off the LVPS [1].
Fig. 9-12
[1]
To Next Page
Loading...
