Toshiba e-STUDIO2803AM - ADU Upper Transport Roller

4
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
4 - 121
4.10.8 ADU upper transport roller
(3) 2 bushings [5] and then remove the ADU
lower transport roller [6].
Fig. 4-323
(1) Remove the automatic duplexing unit (ADU).
 P. 4-116 "4.10.1 Automatic duplexing unit
(ADU)"
(2) Remove the ADU lower transport roller.
 P. 4-120 "4.10.7 ADU lower transport
roller"
(3) Remove 4 E rings [1], 2 gears [2], 2 pins [3],
2 pulleys [4], 2 bushings [5], 1 timing belt [6],
and the earth board [7], and then remove the
transport upper roller [8].
Fig. 4-324
Notes:
Be careful of the orientation of the gears [9]
when assembling them.
Fig. 4-325
[5]
[5]
[6]
[1]
[8]
[3]
[5]
[5]
[4]
[4]
[7]
[6]
[2]
[1]
[1]
[9]