2.COPY FUNCTIONS
Copy Settings 65
2 COPY FUNCTIONS
Image direction
When you make 1-sided portrait originals to 2-sided copy by placing them in a landscape direction, normally
the copied pages are “open to top”. With this function you can make them “open to left”. This function is called
“image direction”.
When you make 2-sided “open to left” portrait originals to 1-sided copy, normally the copied pages exit in a
different direction alternately. With this function, you can make them all exit in the same direction.
This function is displayed only when the Automatic Duplexing Unit is installed.
1-sided portrait original (placed in a landscape direction) -> 2-sided copy
2-sided “open to left” portrait original -> 1-sided copy
1
Press [COPY].
2
Press or to select the item displayed on the LCD screen, and then press .
3
Press or to select the setting item, and then press [OK] or .
Menu Functions Settings
IMAGE DIRECTION OFF
ON
No setting“IMAGE DIRECTION” set
No setting“IMAGE DIRECTION” set
A4
1
READY
100%
MIX-ORIGINAL:OFF
IMAGE DIRECTION:ON
To Next Page
Loading...
