2.COPY FUNCTIONS
Copy Settings 57
2 COPY FUNCTIONS
Copying right and left pages separately
When you place a booklet-type original on the original glass while it is being opened, the right and left pages
of the opened section can be copied separately on different paper. Also, when the Automatic Duplexing Unit is
installed, they can be copied on both sides of paper. You do not need to move the original on the original
glass. The book margin width can be set between 8 to 30 mm (0.3 to 1.2") in increments of 1 mm (0.04").
A4, B5, LT, and 16K sizes are available for this function.
1
Press [COPY].
2
Press or to select the item displayed on the LCD screen, and then press .
3
Press or to select the setting item.
4
Set the setting as follows.
For “OFF”
Press [OK].
For “ON”
1) Press .
2) Press or to increase or decrease the value for the book margin width.
3) Press [OK].
If you just press [OK] for “ON”, the default value (15 mm (0.6")) of this function is used.
Menu Functions Settings
DUAL PAGE OFF
ON
2
23
3
A4
1
READY
100%
EDGE ERASE:OFF
DUAL PAGE:OFF
To Next Page
Loading...
