Toshiba e-STUDIO350 - Page 11

November 2003 © TOSHIBA TEC 1 - 3 e-STUDIO350/450 SPECIFICATIONS
1
• Eliminated portion ............. Leading edges : 3.0±2.0 mm, Side/trailing edges : 2.0±2.0 mm (copy)
Leading / trailing edges : 5.0±2.0 mm, Side edges : 5.0±2.0 mm (print)
• Paper feeding .................... Automatic feeding : Standard drawers–2 drawers (stack height 60.5
mm, equivalent to 550 sheets; 64 to 80 g/m
2
(17 to
22 lb.))
PFP–Option (One drawer or two : stack height
60.5 mm, equivalent to 550 sheets; 64 to 80 g/m
2
(17 to 22 lb.))
LCF–Option (Stack height 137.5 mm x 2: equivalent
to 2500 sheets; 64 to 80 g/m
2
(17 to 22 lb.))
Bypass feeding: (Stack height 11 mm : equivalent to 100 sheets; 64 to
80 g/m
2
(17 to 22 lb.))
• Capacity of originals in the reversing automatic document feeder (Option)
................. A3 to A5-R, LD to ST-R : 100 sheets / 80 g/m
2
(Stack height 16mm or less)
• Automatic duplexing unit ... Stackless, Switchback type
• Toner supply ...................... Automatic toner density detection/supply
Toner cartridge replacing method
• Density control .................. Automatic density mode and manual density mode selectable in 11 steps
• Weight ............................... 83 kg, 183 lb
• Power requirements .......... AC 110V (±10%) / 13.2A, 115V (±10%) or 127V (±10%) / 12A
220-240V (±10%) or 240V (±10%) / 8A
• Power consumption ........... 1.5 kW or less (115V series, 200V series)
*
The electric power is supplied to the RADF, Finisher, Job Separator, Offset Tray, PFP and LCF
through the equipment.
• Total counter ...................... Electronical counter