November 2003 © TOSHIBA TEC 2 - 29 e-STUDIO350/450 OUTLINE OF THE MACHINE
2
Fig. 2-517
Fig. 2-518
Fig. 2-519
[P] Right rear cover
(1) Take off the right upper cover
( Chapter 2.5.1 [F]).
(2) Take off the IH terminal cover
( Chapter 2.5.1 [L]).
(3) Take off the right rear hinge cover
( Chapter 2.5.1 [N]).
(4) Remove 2 screws and take off the right rear
cover.
[O] Right lower cover
(1) Take off the right rear hinge cover
( Chapter 2.5.1 [N]).
(2) Remove 2 screws and take off the right lower
cover.
[Q] Front right cover
(1) Take off the front cover
( Chapter 2.5.1 [A]).
(2) Take off the receiving tray
( Chapter 2.5.1 [H]).
(3) Take off the right upper cover
( Chapter 2.5.1 [F]).
(4) Take off the upper drawer. Open the bypass
tray and ADU.
(5) Remove 2 screws and take off the front right
cover.