3-38 Service Manual
3. Lift and pull the print cartridge out of the printer.
Warning: Do not touch the photoconductor drum on the underside of the cartridge. Use the cartridge
handle whenever you are holding the cartridge.
4. Place the print cartridge aside.
Note: Do not leave the cartridge exposed to light for extended periods.
Note: The print media may be covered with unfused toner, which can stain garments and skin.
5. Pull the print media up and toward you.
Warning: If the print media does not move immediately when you pull, stop pulling. You need to access
the print media from the printer rear door.
6. Reinstall the toner cartridge.
7. Close the top front cover.
8. Close the multipurpose feeder.
9. Press .
To Next Page
Loading...
Need help?
General