Index I-5
paper feed
alignment
7-16
autocompensator 7-12
multipurpose feeder 7-14
printhead 7-10
StapleSmart finisher 7-65, 7-66, 7-67, 7-68
transfer⁄ charging 7-26
pass thru plate 4-18
pick rolls, integrated tray autocompensator 4-51
pick tire
integrated tray autocompensator pick roll
4-51
MPF 4-62
power takeoff shaft and spring 4-72
power-on self test (POST) 2-4
preventive maintenance 6-1
print media
avoiding jams
1-19
card stock 1-18
characteristics 1-15
envelopes 1-16
guidelines 1-15
labels 1-17
sizes 1-8
storing 1-18
types 1-10
unsatisfactory types 1-15
weight 1-11
print quality pages 3-6, 3-26
print registration 3-4
printhead
adjustment
4-2
parts catalog 7-10
removal 4-73
service check 2-122
Q
quality pages 3-6, 3-26
Quick Disk Test 3-18
Quick Test 3-5, 3-9
R
redrive assembly
parts catalog
7-6
removal 4-74
redrive cap cover removal 4-5
redrive door 4-7
REGISTRATION 3-4
registration 3-4
relocation kit 7-69
removals
bevel gear
4-21
cartridge duct 4-23
covers 4-4
fuser wiper cover assembly 4-4
laser cover 4-19
left and right frame extensions 4-17
left cover handle holder 4-16
left door 4-6
paper support removal 4-5
pass thru plate 4-18
redrive cap cover 4-5
redrive door 4-7
right cover handle holder 4-16
right cover removal 4-8
upper front cover 4-11
upper front cover latch 4-13
upper front cover outer bezel 4-14
developer drive assembly 4-24
developer drive coupler kit 4-25
ESD cover 4-25
fuser 4-26
fuser cover removal 4-41
fuser exit sensor 4-28
fuser exit sensor flag and spring 4-30
fuser lamp 4-32
fuser narrow media flag and spring 4-36
fuser narrow media sensor 4-34
fuser to LVPS AC cable 4-38
fuser transfer plate 4-43
gear release link 4-44
high voltage power supply 4-45
inner paper deflector assembly 4-47
inner shield 4-76
input sensor 4-48
integrated tray autocompensator assembly 4-49
integrated tray autocompensator pick roll assembly
4-51
interconnect card assembly 4-53
low voltage power supply (LVPS) 4-54
lower front cover assembly 4-15
lower paper deflector 4-61
main drive assembly 4-57
main fan 4-56
MPF arm assembly 4-60
MPF pick tire removal 4-62
MPF solenoid assembly 4-62
MPF⁄ lower front cover assembly 4-15
operator panel board removal 4-66
operator panel buttons 4-67
outer shield 4-67
paper alignment assembly 4-68
paper bin full sensor flag 4-70
paper size sensing board 4-71
power takeoff shaft and spring 4-72
printhead 4-73
redrive assembly 4-74
signature button contact assembly 4-75
system board 4-76
toner sensor 4-77
transfer roll assembly 4-77
upper front cover hinge assembly 4-78
upper paper deflector assembly 4-79
USB board assembly 4-80
right cover handle holder removal 4-16
right cover removal 4-8
To Next Page
Loading...
