Toshiba e-STUDIO5015AC - To Reduce Streaks at Scanning with DF

2.Copier-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-95
2.24 To Reduce Streaks at Scanning with DF
 Explanation
If streaks occur in copying with the DF, they can be solved by cleaning the original glass in the DF.
Moreover, they can be made inconspicuous by changing the setting of the following self-diagnostic code.
 Procedures
The procedure of this adjustment differs between “When adjusting the image quality of the Black mode”
and “When adjusting the image quality of the Full color mode”.
Refer to the procedure corresponding to the user’s particular request.
Before adjustment After adjustment
<---- Paper feeding direction <---- Paper feeding direction