Toshiba e-STUDIO5015AC - Fine Line; Text Density Adjustment

3.Printer-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
3-18
3.1.6 Fine Line / Text Density Adjustment
You can suppress jaggies by increasing the density of thin lines and small text.
For 600 dpi, the density for all the contents for Image, the small text for Text and a thin line for Graphic
can be increased by the following codes.
• When adjusting Black mode, confirm that “1” is set for 05-7322.
• When adjusting Full color mode, confirm that “1” is set for 05-8102.
For 1200 dpi, the density for the line for Graphic can be increased by the following code.
Moreover, for 1200 dpi, the adjustment range of the line whose density is to be increased can be set.
Color
mode
PDL
Original
type
Code Subcode
Recommended
value
Acceptable
value range
Default
Black
PS
(600 dpi)
- 05-7340 -
Set a value
larger than 0.
0 to 8
The larger the
value, the darker
the thin line or
small text
becomes.
0
PCL
(600 dpi)
- 05-7341 -
XPS
(600 dpi)
- 05-7342 -
Full color
PS
(600 dpi)
General
05-8130
0
Line art 3
PCL
(600 dpi)
General
05-8131
0
Line art 3
XPS
(600 dpi)
General
05-8132
0
Line art 3
Color
mode
PDL
Original
type
Code Subcode
Recommended
value
Acceptable
value range
Default
Black
PS
(1200 dpi)
- 05-8242
0
Set a value
larger than 3.
0 to 5
The larger the value,
the darker the line
becomes.
3
Full color 1
Set a value
larger than 1.
1
Color
mode
PDL Code Subcode
Recommended
value
Acceptable
value range
Default
Black
PS
(1200 dpi)
05-8243
0
Adjustment
range
lower limit
-
0 to 255
When the lower limit
value is decreased, a
line with a lighter color
will become the target
for the adjustment.
When the upper limit
value is increased, a
line with a darker color
will become the target
for the adjustment.
1
1
Adjustment
range
upper limit
- 200
Full color
2
Adjustment
range
lower limit
-1
3
Adjustment
range
upper limit
- 255