Toshiba e-STUDIO5015AC - To Decrease the Image Density and Save Toner; To Print in the Toner Saving Mode

3.Printer-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
3-78
3.8 To Decrease the Image Density and Save Toner
3.8.1 To Print in the Toner Saving Mode
 Explanation
This product offers a toner saving mode. It is intended to automatically decrease the image density and
reduce the amount of toner used. Change the option on the printer driver and perform printing in the
toner saving mode, for instance, if a large number of copies have to be printed, or if the image density is
too high.
If image density in the toner saving mode needs to be adjusted according to your customer’s request,
change its upper limit value.
 Procedures
Both the service technician and the user can perform all adjustments.
Before adjustment After adjustment
Default printing.
Printing is performed, while the toner is
being saved.