3.Printer-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
3-28
3.1.11 Halftone Adjustment (when changing all print jobs)
You can reduce white void, jitteriness and uneven density.
• This adjustment will affect all the print jobs.
Control Panel
Change the roughness of images in 600 dpi printing.
Use steps (a) through (f) to change the setting value.
(a) Press [User Functions -User-] on [Home] screen to enter the “User Functions” menu.
(b) Press [Admin].
(c) Enter the 6 to 64 digit administrator password. Press [OK].
(d) Press [General].
(e) Press [Smoothness Of Print].
(f) Press [Low].
<Note>
• This setting applies to print jobs with 600 dpi. Set this to color and black printing, respectively.
Changing the setting displays the Confirmation screen that asks whether you want to perform
calibration (automatic gamma adjustment) or not.
Be sure to select [OK] and carry it out.
To Next Page
Loading...
