Toshiba e-STUDIO5015AC - Pulse Width Adjustment

3.Printer-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-31
3.1.12 Pulse Width Adjustment
You can adjust smudged text in black.
• When the setting value is changed, be sure to perform automatic gamma adjustment.
• This will affect all of the density area. Therefore, pay special attention when changing the value.
 e-STUDIO2010AC/2510AC
• Set the same value for the standard speed and decelerating.
• When the value is changed, the images to be copied or faxed will be affected.
Color
mode
Resolution
[08]
Code
Subcode
Subcode
description
Recommended
value
Acceptable
value range
Default
Full color
/ Black
600 dpi 2620
0 Standard speed (Y)
Set a smaller
value to make
lines thinner. (The
value 11 or more
is
recommended.)
0 to 255 15
1 Standard speed (M)
2 Standard speed (C)
3 Standard speed (K)
4 Decelerating (Y)
5 Decelerating (M)
6 Decelerating (C)
7 Decelerating (K)
1200 dpi 2622
0 Standard speed (Y)
1 Standard speed (M)
2 Standard speed (C)
3 Standard speed (K)
4 Decelerating (Y)
5 Decelerating (M)
6 Decelerating (C)
7 Decelerating (K)