Toshiba e-STUDIO5015AC - To Perform Simulated Printing with CMYK Inks of each Ink Manufacturer

3.Printer-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-109
3.13.3 To Perform Simulated Printing with CMYK Inks of Each Ink Manufacturer
 Explanation
ICC profiles for CMYK ink series provided by each ink manufacturer are disclosed and distributed by
some websites and some users want to make a simulated printing using one of these profiles. This
simulation is possible by using ICC profiles for CMYK ink of particular ink manufacturer as a CMYK
source profile.
 Procedures
Both the service technician and the user can perform all settings.
(1) Create the desired printer profile using the ICC profile creation software.
(2) Access TopAccess and open the “Administration” tab menu. Then upload the desired CMYK source
profile and printer profile.
Follow (a) to (g) below to upload the profiles.
(a) Access TopAccess and open the “Administration” tab menu.
(b) Open the “Setup” menu and the “ICC Profile” submenu.
PS
XPS
PS
XPS