Toshiba e-STUDIO5015AC - To Make the Light-Colored Area Darker on the Printout

3.Printer-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
3-76
3.7 To Make the Light-Colored Area Darker on the Printout
 Explanation
When the entire image is printed darker to make the light-colored area darker, the highly colored area
may become much darker and blurred. To print only the light area in a higher density and leave the dark
area as it is, change the setting for the printer driver and adjust the background and color balance.
Before adjustment After adjustment
The light-colored area becomes darker but
the highly colored area becomes blurred.
Only the light-colored area becomes darker.
Print
Print