8
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
8 - 11
EC00 Finisher jam
(Inserter section)
Inserter feeding delay jam P. 8-83
EC10 Inserter feeding stop jam P. 8-83
EC20 Inserter reverse path delay jam-1 P. 8-84
EC30 Inserter reverse path stop jam-1 P. 8-84
EC40 Inserter reverse path delay jam-2 P. 8-84
EC50 Inserter reverse path stop jam-2 P. 8-84
EC60 Inserter transport delay jam-1 P. 8-84
EC70 Inserter transport stop jam-1 P. 8-84
EC80 Inserter transport delay jam-2 P. 8-84
EC90 Inserter transport stop jam-2 P. 8-84
ECA0 Paper remaining in Inserter Unit at power-ON P. 8-85
ECB0 Incorrect setting of paper size for Inserter Unit P. 8-85
ECC0 Inserter Unit misfeeding P. 8-85
ECD0 Inserter Unit door open jam P. 8-85
Error code Classification Contents Troubleshooting
To Next Page
Loading...
