Toshiba e-STUDIO557 - Page 146

8
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
8 - 145
[F106_3] ADI-HDD error: ADI authentication Admin Password generation error
[F106_4] ADI-HDD error: Authentication random number generation error
[F106_5] ADI-HDD error: Authentication data transmission error
Classification Error item
Other service call ADI-HDD error: The generation of ADI authentication Admin Password
fails.
Check item Measures
Setting
Reinstall the system ROM data (OS Data).
Reinstall the master data (HD Data).
Classification Error item
Other service call ADI-HDD error: The generation of a random number for authentication data
fails.
Check item Measures
Setting
Reinstall the system ROM data (OS Data).
Reinstall the master data (HD Data).
Classification Error item
Other service call ADI-HDD error: The transmission of authentication data fails.
Check item Measures
Setting
Reinstall the system ROM data (OS Data).
Reinstall the master data (HD Data).
In case this error occurred after returning SRAM data for SRAM cloning:
Copy the ADI-HDD encryption key from FROM to SRAM.
1. Start the equipment in the 3C mode: [3] + [C] + [POWER]
2. The authentication menu is displayed. Press [OK]. (Not required in the
default setting)
3. Select “5. Key Backup Restore” and then press the [START] button.
4. Select “6. ADIKey FROM to SRAM” and then press the [START] button.
5. After the restoring of the encryption key has completed, “Operation
Complete” is displayed.
6. After the operation has completed, shut down the equipment by
pressing the [POWER] button.