202
1Cabinet
(continued)
8)Remove the hook of the protective plate
(side) from the hole of the middle partition
plate.
(2 locations)
2. Attachment
Carry out installation by following the
detachment procedure in reverse (10)
➝ 1)).
Be careful of the hooks provided on the suction
cabinet, service panel and lower cabinet.
No. Part to be replaced Work procedure Remarks
8) Remove the hook
of the protective plate
(side) from the hole of
the middle partition
plate (2 locations)
8) Protective plate (side)
Service panel
Hook
To Next Page
Loading...
