203
2Propeller fan
Fan motor
WARNING
Wear a pair of gloves.
Otherwise, you will risk an injury involving
a replacement part or some other object.
1. Detachment
1)Stop the air conditioner operation, and turn
off the circuit breaker.
2)Remove the screws for the discharge
cabinet.
(M5 × 0.4’ (10 mm), 4 pcs.)
3)Remove the heat exchanger partition plate
(upper).
(M5 × 0.4’ (10 mm), 2 pcs.)
* With a 096 type, 114 type, the fan motor can
be replaced without removing the discharge
cabinet side covers.
4)Remove the flange nut securing the fan
motor and propeller fan.
(To loosen the nut, turn it clockwise.)
5)Remove the square washer.
6)Remove the propeller fan.
CAUTION
Lift it straight up.
Do not forcibly pull it, or it may get stuck.
No. Part to be replaced Work procedure Remarks
3) Heat exchanger
partition plate
(upper)
2) Screws (4 corners)
Discharge cabinet side cover
5) Square washer
4) Flange nut
To Next Page
Loading...
