Toshiba Qosmio G30 - HW Setup; Accessing HW Setup; HW Setup Window

User’s Manual 7-1
Qosmio G30
Chapter 7
HW Setup
This chapter explains how to use TOSHIBA HW Setup program to
configure your computer, and other setting.
Accessing HW Setup
To run HW Setup, click start, click Control Panel, click Printers and
Other Hardware and select TOSHIBA HW Setup.
HW Setup window
The HW Setup window contains the following tabs: General, Display, Boot
Priority, Keyboard, CPU, LAN, Device Config and USB.
There are also three buttons: OK, Cancel and Apply.
General
This window displays the BIOS version and contains two buttons: Default
and About.
Setup
This field displays BIOS Version and date.
OK Accepts your changes and closes the HW Setup
window.
Cancel Closes the window without accepting your
changes.
Apply Accepts all your changes without closing the HW
Setup window.
Default Return all HW Setup values to the factory
settings.
About Display the HW Setup version.