User’s Manual G-5
TOSHIBA RAID
3. The Execute Creation message is displayed once the configuration is
modified. Move the cursor to the appropriate location and press the
space bar to continue.
4. The following message will be displayed. Follow the instructions and
press the keys in the order of 1, 2, 3, 4, [Enter].
Ending the BIOS Setup Program
Save the changes and end the program.
1. Press the End key.
The "Are you sure? (Y/N) The changes you made will
cause the system to reboot." message is displayed.
2. Press the Y key.
The configured settings are saved and the BIOS setup program ends.
The computer may reboot depending on the settings that were
modified.
Pressing the Home key will revert the modified Create State settings back
to the Current State settings.
S
Warning: If you change the RAID array, you
will need to install the OS again. Are you
sure? All data on the HDD(s) will be
destroyed. Do you really want to do this? If
"Yes", please type the key string which is
written in the manual.
To Next Page
Loading...
