4-2 User’s Manual
Operating Basics
The upper right tap zone will be designated as the Mode Button which
switches the Touch Pad from Pointing Mode to Dual Mode.
Dual Mode Operation
When the Touch Pad is in Dual Mode it is divided into eight areas. These
areas include the Mode Button, the volume control zone and six action
buttons. While in Dual Mode the Touch Pad will not function as a pointing
device.
Figure 4-2 Dual Mode Pad
There are two ways to exit Dual Mode, one is to tap the mode button and
the other is to tap one of the six action buttons.
You can also tap the Touch Pad to perform functions similar to those of the
left button.
Click: Tap once
Double-click: Tap twice
Drag and drop: Tap to select the object you want to move. Leave your
finger on the Touch Pad after the second tap and move your finger
along the pad to move the object.
Mode Button Tapping within this button‘s zone will cause the
Touch Pad to revert to normal Pointing Mode.
Volume Control Placing a finger in the volume zone and moving
upwards will increase the volume. Placing a
finger in the volume zone and moving down will
decrease the volume.
This feature may not function with some software.
To Next Page
Loading...
Need help?
General